Black Rhodium Overture RCA Interconnect 1M

• High Purity Silver wire
• Air and low loss PTFE insulation for very low levels of dielectric absorption
• Mechanical Vibration Suppression Materials used in Construction
• Conductors wired in opposing direction for lower noise floor
• Twisted conductors for low RFI, with additional RFI suppression
• Advanced high optical coverage screening braid
• High quality rhodium plated connectors
• Hand built at the Black Rhodium factory in Derby
• High Purity Silver Wire

OVERTURE is made from 99.99% pure silver wire. Silver wire has been chosen for OVERTURE because silver wire delivers superior sound quality to all other less expensive metals and is highly conductive.

Low Loss PTFE Insulation used to Reduce Time Smeared Distortion.

The silver wires in OVERTURE are insulated in PTFE because its low dielectric loss ensures extremely low distortion due to dielectric absorption effects in which sound energy is absorbed in the insulation and released at a later interval of time to create highly audible time-smearing distortion.

Dielectric distortion is further reduced by a layer of air separating the wire from the inner wall of the insulation along its length.

High Optical Coverage RFI Screening
The pure silver conductors in OVERTURE are covered in a braided screen to protect the inner cores from picking up radio frequency interference (RFI) which is further reduced by twisting the cores.

• 99.99% pure silver conductor wires
• Insulated in PTFE for low dielectric absorption and clearer sound
• Braided silver plated copper screen to reduce RFI noised and distortion
• All connectors rhodium plated for long term reliability and resistance to corrosion
• Attractive bright blue outer braid
• Cables can be supplied with either RCA or XLR connectors
• Outer diameter 10mm
• Capacitance of RCA terminated 1m cable 44pF
• Capacitance of XLR terminated 1m cable (Positive to Negative) 50 pF
• Capacitance of XLR terminated 1m cable (Positive or Negative to ground 90pF)