TRIANGLE Australe Ez / Hi-Fi Floorstanding Speaker

Amplifier and Power Handling
Recommended Amplifier power : from 100 to 200 Watts (8 Ohms)
Power Handling : 150W

* The power handling of a speaker is the average continuous power that the speaker can accept without damaging the drivers. You can use an amplifier more powerful than the permissible speaker power by limiting the volume to 70% of the maximum capacity. Conversely, an amplifier that is too underpowered will clip and create distortion, which can also damage the speakers if it is used beyond its capacity.
Speaker Specifications
Type : Floorstanding speakers with front bass reflex port
Crossover : 3 Ways
Sensitivity (dB/W/m) : 92,5dB
Bandwith (+/-3dB Hz) : 35Hz-22 000Hz
Nominal impedance : 8Ω
Minimum impedance : 3Ω


* The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver.
- Nominal impedance is measured at a frequency of 1kHz
- Minimum impedance is measured at low frequencies.

TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers.

Speaker Specifications
Type : Floorstanding speakers with front bass reflex port
Crossover : 3 Ways
Sensitivity (dB/W/m) : 92,5dB
Bandwith (+/-3dB Hz) : 35Hz-22 000Hz
Nominal impedance : 8Ω
Minimum impedance : 3Ω


* The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver.
- Nominal impedance is measured at a frequency of 1kHz
- Minimum impedance is measured at low frequencies.

TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers.
Weight & Dimensions
Speaker dimensions
Width : 200mm
Height : 1130 mm
Depth : 370 mm